The BLACK SABLE process is far more than putting tubes in a chamber and lowering the temperature. The BLACK SABLE process starts with tube selection. Only the best preamp, power and rectifier tubes are chosen to undergo this arduous process. All tubes undergo a 24 hour burn-in under load. The tubes are then placed in the Cryo-Processor where a computer-controlled proprietary system lowers the temperature to -300 Fahrenheit / -184 Celsius for 24 hours and then slowly ascends back to room temperature. Preamp tubes are tested and rated for Gain, Microphonics and Noise. Next, all 7/9 pin tubes have their pins cleaned for a better electrical connection. Power tubes are matched to within 3% for both Ip (Plate Current) and Gm (Transconductance). No other cryogenic process comes close. When only the best will do, choose BLACK SABLE.

Read the BLACK SABLE FAQ

What People are Saying